ECUT 1450 E

TOP FEEDER

– Manual non-stop feeding system (Automatic non-stop feeding system can be chosen as optional);

– Adjustable side blower with scale indication;

– Suction head multi direction adjustment system;

– Safety photo sensor system at feeding table;

– Main feeding table motorized side shift with centering function when it is at low position;

– Feeder head with motorized up and down adjustment;

– Self-adaptive system to adjust the height of the suction head adapted to the pile height in machine operation;

SIDE POSITIONING SECTION

– Anti-static stainless steel transport table;

– Transport belt systme with side guide and automatic tension function;

– Double sheet detector (ultrasonic double sheet detector can be chosen as optional for thin paper);

– Upper sheet pressing frame with lifting device (Automatic lifting device can be chosen as optional);

– Sheet pressing device can be adjusted as a whole to adapt to different types of paper, cardboard and corrugated board;

– Sheet feeding phase adjustment and sheet slow down device to make different types of sheet better adapt to the requirements of gripper bar bite and front gauge;

– Mechanical push and pull side guide;

DIE-CUTTING SECTION

– High strength die-cutting frame, optimized to distribute pressure evenly;

– High precision mobile platen and driver;

– Die-cutting station safety door plus electrical and mechanical safety system;

– Die chase positioning and automatic locking system, centerline system making the cutting die and stripping die centered quickly and precisely;

– Synthetic supporting plate positioning and locking system, cutting plate micro-adjustment system (automatic locking system can be chosen as optional);

– Pneumatic clutch/break and safety control system;

– Motorized pressure adjustment system (die cutting pressure detection and display system can be chosen as optional);

– Gripper bar and driving chain;

– Gripper bar chain guide rails are made of synthetic materials;

– High quality index unit and gears for gripper bars;

– Overloading protection torque limit system for gripper bars and chains;

– Photo sensor detection system when gripper bar and sheets arrive and depart;

– Left and right front lay locking blocks, separate adjustments available;

– Automatic forced lubrication system recycles fluid and is equipped with oil gauge and interruption alarm;

– Automatic main drive chain lubrication.

STRIPPING SECTION

– Center line system for quick stripping die set up and change over, upper and lower frames;

– Fully open-type upper stripping frame, and front/back micro-adjustment system for upper stripping tools;

– Push button of gripper opening is added for easy taking out the production sample at stripping section;

– Lower stripping pin system;

– Front edge waste removal system and center line system for quick setup and changeover of front edge waste stripping tool;

– Full stripping with/without lead edge waste stripping convertible by one button, no tool change, more operator friendly and safe operation;

– Safety door at stripping station; electrical and mechanical safety system.

DELIVERY SECTION

– Delivery lifting table and pile pallet;

– Delivery slow down brush;

– Non-stop auxiliary delivery table;

– Electrical batch counter and tape inserter;

– Front jogger device;

– Motorized side joggers;

– Motorized delivery back gauge and sheet tail supporting device;

– Safety door at delivery section; electrical and mechanical safety system.

ELECTRCALS

– Main motor and variable frequency control system

– Touch screen and control panel;

– PLC system to control machine running and trouble monitoring;

– CE standard electrical components and circuit;

– PLC remote monitoring system (Optional).

SPECIFICATION